Category Archives: Student post

How-to: Scan your face for 3D printing

I was first exposed to the reproduction of human faces through the action film, Mission Impossible: Ghost Protocol. Agents in the Mission Impossible movies often use facial images to create masks that enable flawless impersonations of their nemeses. The process I am about to explain is our Makerspace’s version of facial duplication, which was mentioned in the 3D printing and Ceramics post.

What you need for 3D scanning:
• Scanner: Fuel3D scanner
• Target: Fuel3D handheld target
• Battery pack: Amazon Basics portable battery pack (update: OR AC adapter for wall power)
• Computer program: Fuel3D Studio, Studio Advanced version

Scanning Materials

From left to right: battery pack, scanner, target.

Set-up
1. Obtain a code for the Studio Advanced version of Fuel3D Studio
2. Open Fuel3D Studio on a computer and enter the code
3. Connect the scanner to the computer (micro-USB to USB)
4. Connect the scanner to the battery pack (jack to USB)

Scanning 
1. Open the Viewfinder in Fuel3D Studio. The person whose face is being scanned should hold a Scanify target next to their face or under their chin.

Target position

2. The person taking the scan should hold the scanner so that the face and the target are visible in the Viewfinder.

Side view

3. Adjust the scanner until a green check mark is visible. This means that the scanner has recognized the face.

Viewfinder checkmark

4. Capture the image by pressing one of the buttons on the scanner’s handles.

Capture image

Cropping
Choose the image you want to 3D print and click the Crop icon. Select Positive Crop Zone and place dots around the entire face. Click the check mark when done.

Crop

Volumizing
Next to the Crop icon, click on the Remesher Tools icon. Then select the Volumizing tool. There are 3 options:
• Flat– makes your face into a flat-bottomed solid.
• Extruded– makes your face into a mask-like solid.
• Mirrored– duplicates your face onto both sides of a solid.

Flat volume

Flat volume

Extruded Volume

Extruded volume

MIrrored volume

Mirrored volume

Optional Tools
Fuel3D Studio provides options to fix holes, smooth edges, adjust volume thickness, decimate the solid’s vertices, and equalize the solid’s surface geometry. For the face scans I’ve done, the default settings for all of these tools have worked just fine.

Save and Print
Click on the Save icon. Name your file and choose STL as the format. Now your file is ready to 3D print! I used Cura for slicing, and an Ultimaker 2+ Extended for 3D printing.

Exploring Cura with a Minotaur

Cura is a slicing software that prepares models for 3D printing. Over the past two weeks, I have used a minotaur named Manus to gain a better understanding of Cura.

Cura has hundreds of settings, and luckily, the default settings work pretty well for most objects. However, it is time-consuming to print a large object multiple times just to get the settings exactly right.

Manus is only 40 millimeters tall, so I printed nine different versions of him to create a visual array of Cura’s different settings. I experimented with print quality, print infill, nozzle width, and support.

This screenshot shows Manus along with Cura’s default settings on the right hand side.

Print Quality

A true indicator of print quality is the “smoothness” of the final product. 3D printers work layer by layer, and smoothness depends on layer height. The thinner the layers, the smoother the object. A fast print creates 0.15 mm layers, a normal quality print creates 0.1 mm layers, and a high quality print creates 0.06 mm layers. In my experiment, the difference in quality is most visible is Manus’ eyes.

From left to right: fast print, normal quality, and high quality.

Print Infill

Cura provides a mesh filling for all 3D models. An object’s stability and total print time depend on the density of this filling . Cura has four primary infill options: hollow, light, dense, and solid. Light, the default setting, is 20% infill. Dense is 50% infill.

Left: dense infill. Right: hollow infill.

Nozzle Width

A 3D printer’s nozzle is the pointed metal piece on the print head from which filament is extruded. Ultimaker provides users with a kit containing the different nozzle variations, along with a small wrench to exchange them between prints.

The Ultimaker nozzle kit.

The wider the nozzle opening, the thicker the layers, and the more material that can be extruded at once. At two hours and fourteen minutes, the Manus printed with the 0.25 mm nozzle was the longest print, and also the most successful. The Manus printed with the 0.8 mm nozzle only took 18 minutes.

From left to right: 0.25 mm nozzle, 0.4 mm nozzle, 0.8 mm nozzle.

Support

If a model has an overhanging part, support structures are needed. Otherwise, the printer will attempt to print into thin air, which is not possible. Manus is small enough that he does not need support structures, but his head and horns hang over his body, so the some of the models with no support structures had jagged chins.

Left: supports allowed everywhere. Right: supports allowed on buildplate only.

10 weeks, 2 Ultimakers, and a chair

The idea to set up a tutorial and learn more about 3D printing was born out of the Stagecraft class I took winter term. One of my group members proposed to create a (non-functional) gun as one of the props for our final project, and once we realized we might be able to 3D print it, we got very excited and did exactly that. Casually, I told my friend Emmi about the prop and she mentioned how awesome it would be to learn how to do 3D printing. Both of us carried that thought with us for the next few weeks until we decided to seek out Angela, one of our librarians responsible for the Makerspace (that’s where the mysterious 3D printing machines are), to ask her if she would be willing to pass her wisdom on to us. And so it began.

Neither of us had high expectations. Everything seemed very complicated from the eyes of two students who had never even seen a 3D printer before. But as we should learn soon, the printing process and even the designing of 3D printable objects is not as difficult as one might think.phanty

The first object we printed was a small version of an elephant figure whose file we had downloaded from an online platform, and even though we really just put the file on an SD card, plugged it into the Ultimaker 2+, and let the machine do the rest – we were very proud of our first real print. Next, I tried myself on modifying a batarang by adding writing to it. That also worked out very well and made a friend of mine a great birthday gift.

batarangbatarang2

 

 

 

 

 

What surprised me most was the steep learning curve with 3D printers. Doing more research on the history and applications of 3D design and printing, I realized how accessible the technology already is. Many people talk about 3D printing making it into mainstream households soon, but it never seemed feasible enough to me until I did more research on it.

tableAfter a few weeks of getting to know the machines and playing around with the design programs, Emmi and I decided on a final project that would include designing our own objects from scratch. As a thank you to Angela, we would create a mini makerspace with a table, a 3D printer, a clipboard, a shelf with filament roles, and a chair. Easy enough, the table I designed was simple and worked out on the first try. The clipboard posed no difficulties either. However, when it came down to printing the office chair I had designed in Tinkercad, the odyssey began.

The first trial showed that it would be a challenge to make sure the delicate legs and wheels of the chair would stay in place. Once the nozzle was done with the wheels and started to print the legs, it would push some of the wheels over so that the machine could not keep building up layers in the right places.

abgebrochen

A few times, when I thought it would work out fine, the nozzle completely clogged (which happened throughout our tutorial once in a while) and ruined the print. Alright, I needed to make the chair bigger anyway so I figured the wheels, forming the fragile bottom part of the object, would have more grip that way. That turned out to be misguided. Next, I tried to add additional supports using a program called Meshmixer. Those supports looked nice on the screen, but our Ultimaker could not handle them and kept clogging up. At this point, I had run through about ten trials, nine days, and a lot of filament trying to get the machine to birth me a chair.

waste

Everything else was done: I had the table and the clipboard, Emmi had a little 3D printer model and the shelf with three filament roles in it. The whole scene was made out of clear filament, except for the filament roll duplicates. And we were running out of clear filament. I estimated that I had one try left before I would have to use a different filament color. Desperately, I added square blocks around the wheels of my office chair in Tinkercad, hoping they would help keep the bottom layers (the wheels) down on the platform. Sure, these were not “professional” supports, but I was out of options at this point.

So I started the print, hopefully the last, made sure it printed past the wheels and legs (which it did this time!) and left because I was worried the filament would run out before the chair was done and I could not bear the suspense. When I came back to check on it after dinner, the machine was still. The only light in the room came from the Ultimaker 2+, shining on what I hoped to be something resembling an object people sit on. I walked closer. I could see that there was just enough filament left to feed into the machine, otherwise the role was completely drained. And FINALLY. Finally, I could hold my office chair, the whole thing, in my hands. Our final project was complete.chair

What struck me most going through the process of making one object printable was how many small details count when 3D printing. While 3D printing is on the rise, it takes someone who is willing to investigate and engage with the technology as a hobby to make prints past a certain level of complexity work. At the same time, the learning curve for using these machines and programs is incredibly steep; once I realized I do not have to handle the Ultimakers using velvet gloves and started experimenting around, I learned a lot very easily just by trying things out. For me, the hobby aspect of it makes it even more exciting, and I wish I had discovered the Makerspace earlier. That being said, I am very glad Angela took us on and enabled us to explore this technology more. 3D printing will define this century, and I will most likely return to it as soon as I get a chance, even after I leave Lawrence.

fullsetfullset4fullset3fullset2

 

 

 

My 3D Printing Story

On the evening of March 9th, I attended a performance in Esch-Hurvis. I sat down in the front row with my friend Tahnee, and she started talking to me about 3D printing. At the time, it was an abstract concept in my mind. I didn’t even know what a 3D printer looked like. We talked briefly about setting up a 3D printing tutorial, and then the show started.

It could have ended there. So many conversations give birth to ideas that are easy to discuss and easy enough to see through, but don’t turn into a realization of those ideas. It was tenth week, but Tahnee sent the emails and set up the meetings and we made a rough list of things we wanted learn. By the end of March, ART390: TU-3D PRINTING & DESIGN had come to life.

Like I said, 3D printing was an abstract concept to me. The term is self-descriptive, but I couldn’t wrap my mind around a machine that makes any object you want emerge from its inner workings. At the very least, I thought that I’d have to learn how to code for this tutorial.

As I’ve found with most things in life, 3D printing is easier than I expected. Thingiverse is one of the many websites where makers share downloadable files of objects they’ve designed. Once a file is saved, you open it in a program called Cura, scale the object to your liking, load the 3D printer with filament in the color you want, and print. No computer science skills necessary.

Even though it is a relatively new technology, there are a lot of talented artists in the 3D printing world. On Thingiverse, you can search for anything from cookie cutters to models of internal organs. Tahnee and I both love elephants, so that is what we chose to print for our first assignment.

thingiverse

The blue one on the bottom left was the winner.

I am a huge space nerd. As soon as I’d mastered the basics 3D printing, my first impulse was to print an astronaut helmet and a replica of Saturn and a model of the NASA logo and a plaque that says “I Need My Space.” I had no idea that 3D printing could be used for so much more than making personalized dorm decorations.

As part of this tutorial, Tahnee and I did research on 3D printing for the History and Education pages of this blog. I found online communities and news sites dedicated to 3D printing. I learned that it is being used to create new shapes of pasta, models of textbook images for blind students, Game of Thrones props, prosthetic limbs and organs, fake sea turtle eggs to track poachers, and more. It’s cool to imagine what 3D printing will accomplish as it becomes more mainstream. And ironically, the only coding I did this term was when I was editing those blog pages.

custom-made-pasta-italian-cuisine-giant-barilla-unveils-3d-pasta-printer-1

Italian pasta creator Barilla made this shape on a 3D printer.

Our second assignment was to download a file and modify it using a program called Tinkercad. At first, using Tinkercad feels silly. It’s designed for makers of all ages, so the interface is user-friendly to the point of rainbow colors and extensive tutorials. That being said, once I got past (skipped) the tutorials, I realized that Tinkercad is more than just a K-6 educational website.

tinkercad

Tinkercad is a website where makers design 3D printable objects out of geometric shapes, numbers, and letters.

In the spirit of creating something useful, I downloaded the object file for an iPhone stand from Thingiverse and used to Tinkercad to add the words “¿Diga?” and “¡Ciao!”, which are a way to say “Hello” and “Good-bye” on the phone in Spanish. I’m an undeclared Spanish major, so I thought it was a funny idea.

phone stand

My custom-made phone stand.

Just like most things that are easy at first, 3D printing has some hidden challenges. First of all, it takes a long time. 3D printers construct objects layer by layer with a very thin film of plastic. Phanty, our 3cm tall elephant from the first assignment, took 3 hours to print. My phone stand took 12 hours.

16656068207_8598e13f26_k

3D printers print objects layer by layer.                                            Maurizio Pesce | Flickr

Since 3D printing is a new technology, a lot of troubleshooting is also involved. The print head gets clogged easily, and you have to go through a process called the Atomic Method to unclog it. The built-in fans on the printer adjust automatically and will blow the filament out of place. Sometimes, the object will start becoming lopsided and collapse.

This means that you have to start over a lot. It means that a 3-hour job could really be an 8-hour job. And it means that you have to waste a lot of filament. The filament we use is PLA plastic, which is biodegradable. However, degradation in a landfill can take years, so it did give me a little bit of dissonance to read about how 3D printing is being used to create a line of shoes made of only plastic marine waste, while simultaneously adding to that waste.

For me, the pros still outweigh the cons. Tahnee and I decided to create a miniature makerspace for our final project. It took several weeks and an entire spool of transparent filament, but the satisfaction I felt when I saw everything together was worth the hours it took.

My proudest achievement this term was the 3D printer that I made for this project. My first attempt failed because the fans blew the filament out of place, and the second failed because I did not make sure that the printer created support structures for the build plate in the middle of my design. Since the 3D printing process is layer by layer, those structures are needed so that the 3D printer does not try to print in thin air.

3dprinter

The Tinkercad workplane design.

3attempts

My two failed and one successful attempts.

shelf

I also designed a shelf and some extra filament rolls.

DSC06567

Our mini makerspace.

My 3D printing tutorial has improved my work ethic. It has made me feel a little attached to a machine that I did not even know existed on this campus ten weeks ago. But mostly, 3D printing has changed the way I think about the connection between the real world and technology, and I feel smarter because of it. A million thank-yous to Angela for taking the time to teach Tahnee and me about this new art form.